Manual Cleaning

1. Dilute with water or use full strength.
2. Clean in sections using a bristled brush.
3. Work in small sections and allow product to penetrate for 3-5 minutes. Do not allow product to dry on surface.
4. Rinse with water

Do not allow product to dry on surface.

Dilution Instructions

If mixed (1:29) with water, one gallon of Mean Green Pressure Washer Ultra Concentrate will make 30 gallons and clean 7,500 square feet (less on coarse surfaces). It can be applied with a pressure washer, Mean Green hose end sprayer attachment, pump sprayer or brush.

DIRECTIONS: Pressure Washer Application

1. Rinse all plants in the area with water, before and after application.
2. Wet the surface to be cleaned, before applying the product.
3. Place detergent siphon tube and screen filter directly in container. Adjust meter valve (if applicable) to give desired dilution product flow. For machines with a reservoir, pour Mean Green (full strength) in to pressure washer detergent reservoir to give the desired dilution.
4. Spray to wet the surface with solution at low pressure.
5. On vertical surfaces, always wet from top to bottom.
6. Allow solution to remain on surface to penetrate up to 5 minutes. Do not allow product to dry on surface.
7. Rinse surface thoroughly with water.
8. Flush all equipment and siphon tube with clean water prior to storage.

IMPORTANT: Read Entire Label Before Use

• Using a pressure washer to clean painted surfaces, the water pressure alone may remove paint, or highlight existing discoloration caused by the sun.
• On heavily soiled or mildew stained surfaces it may be necessary to scrub with a brush and a second application may be necessary.
• When cleaning concrete and other porous surfaces, severe grease and oil may continue to rise to the surface even after cleaning.

*Makes 50% more gallons compared to other brands’ 1 gallon size of pressure washer concentrate.